Home
About Us
Products
News
Maintenance
Service
Contact Us

Home

CNC Glass Cutting Line

This line consists of three parts -- full auto loading table, full auto glass cutter and auto glass breaking unit to realize the flow processes of glass loading, cutting and breaking.

Affiliated series:

Glass Cutting Machine

Service Hotline：+86-18560126606

Product Details

This line consists of three parts -- full auto loading table, full auto glass cutter and auto glass breaking unit to realize the flow processes of glass loading, cutting and breaking.

Introduction:

This line has been comprehensively upgraded by means of introduction of European leading technology, world newest tech and process to eliminate the insufficient performances, incomplete functions and unstable operation from domestic glass loader, moreover, through the precise racks, slide-rails, servo motors and pneumatic elements, it achieves the long-term stable accuracy and fast running; with the newest American Galil control system, it features even faster operation, higher safety, higher efficiency, more stability and better accuracy; with the photoelectric positioning, it facilitates the simple and precise operation and prominent labor saving.

Automatic loading machine:

1. The basic working principle:

Mainly used for automatic glass slices. Put the glass in the specified location, take after sign the slices chuck up automatically at glass after adsorption and be placed in Taiwan transfer roller, automatic glass to the cutting machine on the host.

2.Equipment part:

Is mainly composed of frame mechanism, turnover mechanism, lifting mechanism, X axis sucker, walking mechanism, Y axis moving mechanism, conveying mechanism, vacuum and gas control system, electrical control system of eight parts.

3. The equipment of institutions:

Framework is mainly composed of institution, flip agencies, chuck hoisting mechanism, travel mechanism X axis, Y axis motion mechanism, transmission organization, vacuum and pneumatic, electric control system Eight most of gas control system the equipment adjustment and maintenance manual ways, each action can be separate Complete, also can be used for normal work. Given slices signal (manual, automatic) after turning, the system work, make motor driven mechanical reverse institutions Disc arm turn up, and achieve the same Angle flip stop and glass, before moving motor making suckers, at the top near the suction cup detection switch when in contact with the glass, Stop forward motor. When vacuum system, work began to adsorption glass sucker, when the vacuum pressure switch to set pressure, adjustable according to the thickness of the glass vacuum pump stops, the chuck of the scale Linkage driven by motor lift up the glass, in this location about stopping for a few seconds later, make sure that single piece of glass suction, motor driven mechanical turnover mechanism make the glass countertops transmit mesa, telescopic rod system landed the suction cup and glass at the same time, rapid release chuck compressed air blowing glass, start to send glass to drive mechanism Machine on the front to stop signal point. Then the whole frame of mobile automatically find zero after stop, wait for cutting machine signal, can with glass cutting machine with speed

Piece sent to the cutting table, glass is sent out automatically after work cycle on a piece of program, this machine is used according to the required thickness of the glass arbitrarily selected location into slices.

Technical parameters:

upper and lower size range: minimum size: 1500 * 1200 mm;(single side)

the biggest piece of size: 4000 * 2800 mm;

slice thickness: 3 ~ 19 mm;

absorption depth: 750 mm can make the necessary improvements according to the needs of the customer);

the X axis walking speed: 5 ~ 30m/min (adjustable);

walking speed: 8 ~ 18m/min (adjustable);

transmission speed: 5-30 m/min (adjustable);

the number of turning arm: four arms;

the number of single arm chuck: three;

the reverse: double, single, transfer, can choose according to customer's requirement.

the cycle: 50 s or less (every one station to increase 10 s);

installed power: AC380V / 50 hz (special circumstances) can be adjusted according to customer's requirements;

the total power installation: 5-10kw;

compressed air: 0.6-0.8 kpa.

vacuum pressure: -50 ~ -99Kpa (adjustable according to the thickness of the glass);

mesa height: 900 + 20 mm;

shape size: 4500 * 2950 * 900 + 20 mm.

Fully Automatic Glass Cutting Machine

1) chassis material selection profile bridge steel manganese content in the national standard (Q345A) welding molding and after aging treatment, such good comprehensive mechanical properties of steel, plastic and good welding performance. Surface with special cleaning process to remove surface pitting and table oxide layer, the underlying senior spray epoxy primer, surface spraying, senior automotive paint;

2) equipment through professional structural analysis software, ensure that the stability of the machine, dynamic balance, mechanical strength to achieve the perfect coordination, and ensure the table structure deformation;

3) devices have a key reset function, simply click on the touch screen can finish automatically all the preparation work before starting, large Improve the work efficiency;

4) the whole cable, trachea layout is reasonable, completely sealed;

5) on cutting oil way: with double oil (divided into general cutting oil and advanced cutting oil), and air filter device, ensure that the use of cutting oil cleaning, cutting oil automatically, and the knife synchronization (both cutting oil can also note, mainly is the true of TCO, low-e glass etc.);

6) guide only with high-speed mute linear guide rail, cutting high accuracy, low noise;

7) the use of advanced Japan yaskawa portions of the servo motor, make the equipment reliable performance, small error, high efficiency;

8) cutting operation in Japan SMC proportional electromagnetic valve, according to the glass thickness automatically adjust the pressure, rotate 360 degrees of the cutting tools, top and bottom cushion under the knife cutting (can be accurate cutting any straight lines and various special-shaped glass), crawl cutting head is equipped with wheel, effectively prevent the assembly of the cutting tools and glass of accidental damage;

9) segment containing the knife protection function, if the head of the gap on the outside of the glass or glass, program automatically stop, effectively prevent the damage to the parts and glass;

10) conveyer, synchronous automatic transmission device, convenient for glass and transmission;

11) positioning device, photoelectric scanning positioning system with mechanical positioning and;

12) compensation function, cutter eccentricity compensation, clearance compensation, pitch compensation.

Technical parameters;

1) The biggest cut glass size: 4200 x 2800 mm

2)Cut the glass thickness range: 3 ~ 19 mm;

3)Cutting precision glass straight line: + / - 0.20

4)Cutting glass abnormity accuracy: + / - 0.25;

5) Glass cutting speed: 0-160 - m/min.

6)Glass conveying speed: 0 to 23m/min.

7)Equipment installation dimensions: 4950 * 3600 * 1500 mm

8)The equipment working height: 900 mm + 20 mm;

9)Equipment, weight: 2800 kg;

10)Equipment total power: 5-8KW.