Glass Drilling Machine

◎The machine structure is made of N0.45 quality thick steel plates,which is of casting materials (annealed to preventdeformation),Which can bear large loads and has stable performance. ◎The workbench is of casting material(annealed to prevent deformation).Which has simple-operating, stable function, safetv and lona durability. ◎Machine tool rigidity, drlling diameter: for drilling large diameter holes, Under automatic feed drill, the dril automatic feed processing, superior performance, High work efficiency and easy operation.

Affiliated series:

Service Hotline：+86-18560126606

Product Details

The machine structure is made of N0.45 quality thick steel plates,which is of casting materials (annealed to preventdeformation),Which can bear large loads and has stable performance.

◎The workbench is of casting material(annealed to prevent deformation).Which has simple-operating, stable function, safetv and lona durability.

◎Machine tool rigidity, drlling diameter: for drilling large diameter holes, Under automatic feed drill, the dril automatic feed processing, superior performance, High work efficiency and easy operation.

Machine Features

◎The machine can be used 3-25mm thickness different thickness glass drilling.

◎ It adopts pneumatic device fix the glass sheet.

◎ You can drill different size diameter hole through changing the drilling bit and drilling plate.

◎Using good quality stepper motor to realize drilling from up side and down side one by one.No bang edge.

◎It adopts infrared positioning.

◎the upper and lower drill bits drill holes successively, and the lower drill bit rises automatically, and the position and speed can be adjusted. Automatic material retrieving, pneumatic lifting of the workbench, which can be used for continuous production and processing in large quantities.

◎It is very easy to use and maintenance.

Performance requirements of the whole drilling machine

◎ The temperature rise of the bearings in each part shall not exceed 45 degrees Celsius, and the maximum temperature shall not exceed 85 degrees Celsius.

◎ The electrical system is safe and reliable, the action sequence is correct and accurate, and the data display is clear and accurate. Insulation resistance greater than or equal to 1 ohm.

◎ The gas path is correct, the action is accurate, and there is no leakage. The working air pressure can be adjusted within the range of 0.2-0.5MPa.

◎ The cooling water is fully free from blockage and stagnation. There are no leaks in the waterway.

◎ The movement of the transmission mechanism is reliable and accurate, and there must be no impact and crawling.

◎ The drill bit advances and retreats smoothly without any blockage.

◎There must be no blockage and leakage in the lubricating oil circuit.

◎ If there is no glass positioning mechanism, the glass must not be displaced when the pressure plate presses the glass.

Product processing accuracy of drilling machine

◎ The allowable deviation of drilling glass aperture is less than or equal to 0.3mm.

◎ The allowable deviation of the coaxiality of the aperture is less than or equal to the diameter of 0.3mm.

◎ When the hole diameter is less than or equal to 10mm in diameter, the allowable edge of the hole is less than or equal to 0.5mm; when the aperture is greater than or equal to the diameter of 10mm, the allowable edge of the hole is less than or equal to 1.0mm

Technical Parameter:

Model	CSQ0222
MaxProcessing Size	2200x2700mm
Processing Thickness	3-25mm
Drilling Diameter	Ф4-Ф220mm
Working table size	2200x1480x900mm
Size	2200x2700x1700mm
Table height	750mm
Bevel positioning error	±0.2mm/㎡
Voltage	380V/ 50Hz
Power	2.45kw
Weight	1200kg